Nespresso Vertuo Plus Descaling Is Not Working: Fixed!

nespresso vertuo plus descaling is not working

Have you been in a situation where you want to descale your Nespresso Vertuo Plus machine and it is not working out for you? And you thought that your machine was damaged. There must be something you are not getting right that needs to be in place.

Descaling your Vertuo Plus machine helps to prolong the vitality span and it provides you with high-quality products and tasty coffee.

In this article, we’ll carry you through each step process that is needed to descale the Nespresso Vertuo Plus Machine.

The procedure of Descaling should be launched slightly every 3 months to bypass long-term deterioration to your appliance And prevent the orange descaling light from coming on.

What is Descaling

“Descaling” is the act of extracting the mineral stakes from your Vertuo appliance’s inner textures. It helps to keep your Nespresso functioning in the due way. These buildups should be ejected by descaling the appliance.

What Are The Causes Of The Nespresso Vertuo Plus Descaling Not Working 

All Nespresso Vertuo machines have a build of deposits of calcium and lime over time when being used. These come from the tiny amounts of mineral salts that are found in water supplies. They’re harmless, and in fact, we need them to stay healthy but for your machine, it is not healthy for it. All they will do is create a build-up in your hot water appliances.

How To Fix Your Nespresso Vertuo plus Descaling 

  • You have to turn on your Nespresso Vertuo machine extract any used capsules, and impulse the lever down for it to seal well. 
  • If you like to turn off a coffee maker, push the lever down for 3 seconds. You must make sure to unpack the tablet receptacle and the cup support before spinning off the appliance. 
  • Follow the guidance on your descaling manually and water solution Manual kit and fill up the water tank.
  • You have to push and hold the button plus the lever for 3 seconds for it to descale your trash disposal. A fiercely orange glow will show up when you do this.
  • Leave it for 2 minutes, then push the lever down one more time to choose the descaling mood. An orange light will spin once it is switched on.
  • Place a receptacle under the coffee portal with the capacity of a 20-ounce bowl.
  • Push the switch to begin your bowling process. Once the process is complete, it will stop on its own.
  • The water tanks should be emptied and refilled with neat water. 
  • Rinse your machine by pushing the switch again. It will turn off on its own once it is done, you can still turn it off once the orange glow winks its light every 2 seconds.
  • To exit the descaling mode, grip down the lever button, and hold it for 3 seconds. The rays that will come out will blink from red to green. When it happens, it will tell you that you’ve left the Descaling mood.

Allow the machine to parch for 10 minutes before fixing it back and using it.

How Often Should We Descale A Nespresso Vertuo Plus Machine

The frequency at which you descale your machine depends on what is known as ‘water hardness’,  which implies how greatly mineral salts are currently in the town or city’s water reserve.

Regions with increased water hardness will cause you to continually descale your appliance more frequently than you may think, and provinces with insufficient water hardness do not need much maintenance of the Vertuo Plus machine.

The table below will give you a description of how the Descaling should take place.

S/NNo. Of Coffee Per Day Descaling Frequency 
12-43 Months
25-82 Months
38-10Every Month 

Note: The solution or guide that is explained here is for only Nespresso Vertuo Plus users. If you make use of other products, please don’t use the method here for it. Failure to do so can lead to damage to your Nespresso Vertuo Plus machine. If you are making use of other coffee machines please check their menu to know how many times to descale.

What Is the Best Equipment to Descale the Vertuo Plus Machine?

Exterior Clean

Make use of a wet fabric with a little portion of detergent to scrub down the body of the appliance. It’s instructed not to scrub the appliance in the sink, water can infiltrate inside and deteriorate the electronics and it can lead to rust.

Descaling Rinsing Solution 

You need to combine the descaling solution that you retain and run it throughout the machine. Put on the machine and ensure there is no capsule inside the mechanism. Empty the capsule bin once you are done.
Supply the water reservoir with the combination of the descaling solution and water. If what you are using is a Nespresso descaler, make use of one sachet of descaler, and top it up with 500ml of water. When you are done with it. Use the mixture to rinse your machine.

Fresh Water Rinse

The next step to take is to rinse out any remaining descaling solution that is in the machine. You should do this with fresh water from the tap.

Time Management

The number of times that you need to finish this up is 25-30 minutes. If you finish the Descaling and it does not work, then you have to start all over again to get it done.

Frequently Asked Questions

How Long Will It Take To Descale?

It doesn’t take long, once your material for the Descaling is ready, The process of descaling the Nespresso VertuoPlus will take between 20 and 30 minutes and that is all.

What Is The Descaling Solution Made Up With?

A descaling solution is an acidic chemical that has the capacity to dissolve mineral salts such as oxides and carbonates. Some Notable descaling agents include acetic acid, citric acid, and lactic acid. These are food-safe chemicals, yet, citric and acetic acid add a noticeable taste to the machine, thus lactic acid is preferred for the cleaning of your machine.

Can You Make Your Descaling Solution?

Yes, you can use all descaling products for any brand of coffee machine. Read the machine’s specific descaling instructions first so will make sure you use the correct amount of product.

Can I Descale Using Functioning Soda?

No, as You can’t, we do not recommend baking soda to descale a coffee machine.

Can Any Descaler Be Used For My Vertuo Machine?

Yes, you can use all descaling products for any brand of coffee machine. Read the machine’s specific descaling instructions first so will make sure you use the correct amount of product.

Conclusion

We hope our comprehensive descaling guide for the Nespresso VertuoPlus machine was helpful to you. 

Follow the description that is in the article and get your Nespresso Vertuo Plus machine back in order.

You Can Also Read!

Similar Posts